user manual

ND-20292
CHAPTER 7
APRIL, 1990
Once the table data is displayed the
programmer must enter the route advance
table number to which the LCR-E should refer,
to determine which route table will be used to
process the attempted call.
Route advance tables are numbered 00-63. One
of these table numbers should be assigned
under each hourly number shown in the
display. In the daily schedule display, the
numbers O-23 correspond to the hours of the
day, in military time. If hour 0 is assigned a
table, that table will be referred to from the
hour of midnight to 00:59:59 AM. The use of
hour number 13 refers to the time between
01:OO:OO PM and 015959 PM.
After selecting a table assignment for each
hour, depressing CR (RETURN) enters the
data into the computer for that table and
increments the table number by one.
Depressing the return key will now allow
programming of the next table. Prior to
depressing the return key a second time, the
programmer can enter a new table number to
be modified.
NOTE 1:
NOTE 2:
NOTE 3:.
The use of cursor keys allows the
programmer to freely move the cursor
position to correct any mistakes made
during entry of data.
If any hourly assignments are left blank
(unassigned), when the LCR-E ETU looks at
this table during that hour, a busy tone is
returned to the calling party restricting the
calling party.
No data is entered into the floppy disk until
the ESC key is depressed. At the time that
the ESC key is depressed, the data is saved
to the floppy disk and the display is
returned to the Modify Menu.
D. Route Advance Table
The route advance table is used to select which
route tables will be used by the LCR-E ETU to
determine the trunk used to process the
attempted call.
The route advance table
makes available to the programmer up to four
different route table assignments which can be
used by the LCR-ETU to find the trunk to be
used. The priority of selection is from top to
bottom, first to fourth route table number
assignment. The following steps show how to
modify the route advance tables.
SAMPLE LCD INDICATIONS
I
I
00 00 00 00 00 00 01 01 01 00 00 00
***DAILY SCHEDULE MODIFY***
DAILY SCHEDULE TABLE NO.?
04
700 - 41