user manual
ND-20292
CHAPTER 7
APRIL, 1990
With the Modify Menu in the display, depress
4, depress CR (RETURN). The display at right
is shown.
Enter the number of the route advance table to
be modified, depress CR (RETURN). The
example to the right shows table 20.
Now entered is the route table to be used by
the LCR-E ETU as the firat, second, third, or
fourth route. Available assignments for route
tables are 000-255. The reason for providing a
maximum of four routes is in case the first
route is busy, or cannot be used for a given
reason the LCR-E ETU can continue to choose
a different route of slightly higher cost but
does not restrict the user, until an available
route is found. If all routes are unavailable,
the user is restricted.
Once all desired routes are assigned a route
advance table, depress the CR (RETURN) to
enter the data into the computer. The route
advance table number is incremented by one.
Depress the return key to access the next table
to be programmed. Enter the table number to
be modified and depress the return key.
NOTE
1:
NOTE 2:
Using the cursor keys allows correction of
mistakes made during data entry.
Data are not entered on the floppy disk until
the ESC key is depressed. When the ESC
key is depressed, the data is saved to the
floppy disk and the display is returned to
the Modify Menu.
E. Route Table Modify
The route table is the heart of the LCR
programming. The purpose of the other tables,
previously discussed, is to allow the LCR-E
ETU to reach a specific route table based on
the area code dialed and either the time of day
and day of week (if used) and/or based on the
available routes.
Each route table contains specific data that is
used by the LCR-E ETU to determine not only
which trunk access code will be used to select
the trunk, but the manner in which the
number is to be dialed. The following steps are
used to properly assign route tables.
SAMPLE LCD INDICATIONS
[I (
***ROUTE ADVANCE MODIFY;**
ROUTE ADVANCE TABLE NO. ?
20
1ST ROUTE TABLE NO. :
***
2ND ROUTE TABLE NO. :
***
3RD ROUTE TABLE NO. :
***
4TH ROUTE TABLE NO. :
***
***ROUTE ADVANCE MODIFY***
ROUTE ADVANCE TABLE NO. 7 20
1ST ROUTE TABLE NO. :
2ND ROUTE TABLE NO. :
3RD ROUTE TABLE NO.
ii:
:
4TH ROUTE TABLE NO.
001
: 004
700 - 42