user manual
SAMPLE LCD INDICATIONS
5.
The following procedure describes
modification of the Home NPA code table.
With the Modify Menu in the display, depress
8, then depress CR (RETURN). The display
shown at the right will be provided.
Type in the numbers corresponding to the local
area code in which the system is installed.
Depress return to enter the data into the
computer memory.
Depress the ESC key to enter the data onto the
floppy disk and return the display to the
Modify Menu.
Depress the ESC key to return the display to
the LCR main menu.
Display
Mode
The display mode function is made available at the
LCR Main Menu. This function allows the
programmer to view (not change) the data
available in any of the tables in the floppy disk.
Since this function only allows viewing data from
the floppy disk, the programmer may decide to up
load data from the LCR-E ETU to the floppy disk
(before using this option) if it is desired to view the
contents of the present data in the LCR-E ETU.
The following pages show the steps required to
properly use the display mode function.
The first step in using the display mode function is
to make sure that the LCR MAIN MENU is in the
display of the computer. Depress 5, on LCR Main
Menu, then depress the return key.
The program for the display function is loaded
from the floppy disk and the display at right is
shown.
The Display Menu allows the programmer to
choose any table for viewing.
The normal
sequence of operation within the display mode is to
select a number from the display. After entering
the selection number, depress the return key. This
causes the computer to load the data from the
floppy disk into the computer’s memory. Once this
is done, a display is provided, which requests the
table number to be viewed. Within the area code
tables, an area code must also be entered. The
office code tables also require an additional entry.
After this information is entered into the
computer, the display mode function displays the
contents of the requested table.
***HOME NPA CODE MODIFY***
HOME NPA CODE :
516
ND-20292
CHAPTER 7
APRIL, 1990
***DISPLAY***
1 AREA CODE TABLE
6 EXTRA CODE TABLE
2 WEEKLY SCHEDULER 7 OFFICE CODE TABLE
3 DAILY SCHEDULER
8 HOME NPA CODE
4 ROUTE ADVANCE
5 ROUTE TABLE
ENTER MENU NO.
c]
700 - 49