user manual

ND-20292
CHAPTER 7
APRIL, 1990
Once the table has been viewed, the programmer
depresses return and the table number in the
display is incremented by one. The contents of the
new table may be viewed. Using the cursor up key
allows moving to the table number position and
selecting a different table for viewing. If this is
done, depressing the return displays the new table.
After all desired tables have been viewed, depress
the ESC key to return to the Display Menu. A new
table type can be selected and-further viewing is
possible.
Using the ESC key while in the Display Menu
returns the display to the LCR Main Menu.
Below and on the following pages is provided an
example of the display mode as applied to each
table type selection.
A. Area Code Table Display
While in the Display Menu depress 1, then
depress the CR (RETURN) key. The display at
the right is shown:
Enter the Tenant number (l-3) desired, then
depress the CR (RETURN) key.
Enter the desired area code, then depress the
CR (RETURN) key.
The content of the desired area code table is
now displayed.
B. Weekly Schedule Table Display
NOTE 1:
NOTE 2:
NOTE 3:
Using the ESC key returns the display to
the Display Menu.
Using the CR (RETURN) key causes the
displayed area code to be incremented by
one and displays the contents of the new
table.
Using the cursor up key allows moving the
cursor back to the table number position
and changing it to a new number. Depress
CR (RETURN) to view the new table.
SAMPLE LCD INDICATIONS
***AREA CODE f,B:E DISPLAY***
TENANT NO
AREACODE i 0
700 - 50