user manual

ND-20292
CHAPTER 7
APRIL, 1990
6. Print Out Mode
The option of obtaining a hard copy of the table
data is made available using the PRINT OUT
Menu selected from LCR Main Menu. The data
printed out is the information presently stored on
the floppy disk.
The following steps allow the
programmer to obtain a print out of any table data.
With the LCR Main Menu in the display, depress
6, then depress CR (RETURN). The display shown
is provided:
Select the number of the desired table, then
depress CR (RETURN). The example shows the
display provided if option 1 (Area Code) is selected.
If 7 (OFFICE CODE TABLE) is selected, two
additional steps are required.
With the PRINT OUT MODE in the display,
depress 7, then CR (RETURN). The display to the
right is provided.
0
0
NOTE 1:
NOTE 2:
Input the starting table number and CR
(RETURN).
Input the end table number and CR
(RETURN).
The display is an example of area code data
being printed out from the floppy disk. The
blocked off area is replaced with the name of
the table chosen, but otherwise looks the
same for all other selections.
Depress CR (RETURN) to go back to the
Print Out display.
If no problems are encountered during the printout
process, the display to the right is shown.
SAMPLE LCD INDICATIONS
***PRINT OUT***
1 AREA CODE TABLE
6 EXTRA CODE TABLE
2 WEEKLY SCHEDULE 7 OFFICE CODE TABLE
3 DAILY SCHEDULE 8 HOME NPA CODE
4 ROUTE ADVANCE
5 ROUTE TABLE
ENTER MENU NO. [7
AREA CODE TABLE PRINT OUT START
***OFFICE CODE TABLE PRINT***
TABLE NO. FROM 0
***OFFICE CODE TABLE PRINT***
TABLE NO. FROM 100
TO q
HOME NPA CODE
NORMAL END 4
TABLE PRINT OUT START
700 - 54