user manual

CHAPTER 3
APRIL, 1990
MEMORY BLOCK 1B -
1.
2.
3.
4.
5.
6.
7.
8.
9.
OPERATION
Go off line.
Depress Fl.
Depress F7.
RINGING ASSIGNMENT
- AND -N DISPLAY
OF F - LINE (X-XX)
PROGRAM MODE
TERMINAL
R I NG
DAY MO D E
TEL???
Dial station number being assigned.
Example: Station 104.
R I NG DAY MO D E
-T E L 1 0 4
Each line position Ll to L15 should be selected to assign the desired ringing feature for the station chosen
in step 3. (See Note 2).
LED ON (green) = Ring - All CPU levels
LED ON (red)
= Delayed Ring - CPU-EB3 or higher
LED OFF = No Ring - All CPU levels
Depress ENTER key. (See Note 1). RING DAY MODE
TEL105
Repeat step 5 until all desired Multiline Terminals are programmed.
Depressing F20 toggles the programming
RI NG
NIGHT MODE
between day and night mode.
TEL???
If more stations need programming, depress F/W or B/W keys until desired station number is displayed,
then go to step 5.
10. When all Multiline Terminals have been programmed for day and night mode ringing, depress the SPKR
key to go back on line.
300 - 12