user manual
ND-29292
CHAPTER 9
APRIL, 1990
5. Down Loading
Enter menu number (Example: 1, which is Down load, and press t(Return). Display shows:
< SYSTEM MEMORY DOWN LOAD>
DRIVE AND PATH = A:\ABC\
1:
SYSTEM DATA
2:
SYSTEM SPEED DIAL
3:
STATION SPEED DIAL FOR STATION loo-119
(DEFAULT HARDWARE LOCATION)
4:
STATION SPEED DIAL FOR STATION 120-139 (DEFAULT HARDWARE LOCATION)
5:
STATION SPEED DL4L FOR STATION 140-159 (DEFAULT HARDWARE LOCATION)
6:
STATION SPEED DIAL FOR STATION 160-179 (DEFAULT HARDWARE LOCATION)
7:
STATION SPEED DIAL FOR ALL STATIONS
6:
SPEED DIAL FOR 16K TELEPHONES l-2
9:
SPEED DIAL FOR 16K TELEPHONES 3-5
10:
SPEED DIAL FOR 16K TELEPHONES 6-30
11:
SPEED DL4L FOR ALL 16K TELEPHONES (l-30)
12:
FORCED ACCOUNT CODE
13:
SELECTION MODE
ENTER ITEM NO.
OR HIT (ESC!) TO RETURN TO MENU
NOTE
1:
Regardless of the Station numbering scheme that is programmed, Hardware Location
is the Station location in System Default.
NOTE 2: When performing an Up Load or Down Load of the Speed Dial for the 16K telephones,
items 8-11 on the Up or Down Load menu screens, a second step may be required in
order to complete this procedure. If you had entered Item 13 and had selected items 3-7
that coincide with items 8-10, the second step is not required. A message informing you
of the second step appears on the screen after the first step has been performed.
The following lists the steps necessary to perform the 16K telephone procedure:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
From the Down Load menu, choose item(s) 8-11.
Screen prompts you to enter with or without Verify.
Loading begins.
After receiving “NORMAL END”, return to the Down Load menu.
At this time, you must
select the Station Speed Dial, Item(s) 3-7, that represents the 16K telephones that you were
previously loading.
Screen prompts you to enter with or without Verify.
Loading begins again.
Receive “NORMAL END”.
Return to the main Menu and select item 3, Electra Mark2 Initialization.
From the Initialization Menu, select a SECOND INITIALIZATION.
When the initialization is finished, Speed Dial for the 16K telephones has been completed.
900 - 18