user manual

ND-20292
CHAPTER 9
APRIL, 1990
8. Enter item number (Example: 1) and press t(Return). Display shows:
< SYSTEM MEMORY DOWN LOAD >
DRIVE AND PATH = A:iABC\
- - - EXECUTING - - -
Upon completion of this procedure, the system will indicate “NORMAL END’. If
there are any problems during this procedure, see Table 950-3 for a list of errors.
NOTE 1: When more than one it-em is selected by the Selection Mode (131,
the display will show Execute, with or without Verify, for each
item.
Example: If 1,2 is selected to be loaded, the screen will show
Execute and Verify (for item l), then show Execute
and Verify again (for item 2).
NOTE 2: When Down Loading with verify, if a Verify Error message
9.
_
appears, another message will appear informing you that you
may be experiencing line or RAA problems. If this occurs, exit
from the program and attempt another correction to the Electra
Mark11 System. (Refer to Table 950-3)
System Initialization
Enter an item number from the main Menu Display (Example: 31, press
t(Return). Display shows:
< SYSTEM INUWLIZATION >
1. FIRSTINITIALIZATION
2. SECOND INITIALIZATION
ENTER MENU NO. OR HIT (ES0 TO RETURN TO MENU
10. For Local Operation
Enter item number (Example: 2), press *(Return) and (ESC).
The display will return to the Main Menu before the Initialization (First
or Second) begins.
If an attempt is made to perform another function
(Down Load, Up Load, Initialization) before the Initialization is
completed, the program will respond with a “OFF LINE BUSY” message.
If this occurs, depress (ESC) to return to the Main Menu display.
For Remote Operation
Enter item number (Example:
21, press c (Return).
The modems will be disconnected
900 - 20