Electronics America Server User Manual

Configuring Your System 3-21
Server
Move the cursor onto "Server" to display the Server menu.
The table below lists options that you can specify on the Server menu screen and their functions.
To make a selection for "System Management", "Console Redirection", and "Event Log
Configuration", first select a desired option and press Enter to display its submenu.
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Service Boot Enabled
[Disabled]
Specifies whether to boot directly to System
Management menu at system start-up.
Assert NMI on
PERR
[Disabled]
Enabled
Sets support of PCI PERR.
Assert NMI on
SERR
Disabled
[Enabled]
Sets support of PCI SERR.
BMC IRQ Disabled
IRQ 5
[IRQ 11]
Sets the BMC IRQ.
After Power
Failure
Stays Off
[Last State]
Power On
Sets the AC-LINK feature.
Determines the mode of operation if a power
loss occurs. (See the table below.)
Temperature
Sensor
[Disabled]
Enabled
Enables or disables temperature sensor
monitoring feature.
POST Error
Pause
Disabled
[Enabled]
Specifies whether the system waits for user
intervention on critical POST errors or not.
Platform Event
Filtering
[Disabled] Enables or disables triggers for system
sensor events inside the Baseboard
Management Controller (BMC).
[ ]: Factory-set