Electronics America Server User Manual

Installing and Configuring Windows 2000 and Windows NT 4.0 C-3
Preparation
Before starting the installation procedure, you need to obtain certain information for use during the
installation. The table below lists the information you need in advance for the installation. It is
recommended that you obtain the information from your server administrator and record it in the table
before starting.
After completing the installation, you might want to use the Windows 2000 Control Panel to configure
additional devices or Windows 2000 services and facilities.
Item Information Required Enter Your Information Here
1 Name of the Windows 2000 user.
2 Name of the licensed organization.
3 Product Key number for Microsoft
Windows 2000 Server Software.
This number is on the Certificate of
Authenticity included with your
Windows 2000 Server Software.
4 Name that you assign to the server.
5 Obtain your network configuration
information. For example, if network
settings are to be customized:
TCP/IP Configuration values such
as IP address values, DNS and
WINS address resolution facilities,
DHCP Relay and Routing
configuration values.
6 The name of any Administrative
Domain or Workgroup that this
server is to be a member of.