Electronics America Server User Manual

3-12 Configuring Your System
Advanced
Move the cursor onto "Advanced" to display the Advanced menu. The menu item preceded by
"" mark has its submenus. Select an option with the "" mark and press Enter to display its
submenu.
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Reset Config Data [No]
Yes
Select "Yes" to clear the configuration data
(system information stored by POST). The
parameter "No" will be resumed when the
server restarts.
Numlock [Off]
On
Enable or disable the Numlock function at
system start-up. If "Auto" is selected, the
Numlock function will be enabled when an
entry with the keypad is detected.
[ ]: Factory-set
IMPORTANT:
!
Boot Monitoring feature is not supported in this server.
!
If Reset Config Data is set to "Yes", boot device priority is also
cleared. Take a note of boot device priority before changing the
parameter. Restart the server with Exit Saving Changes option, start
BIOS SETUP utility, and restore the boot device priority.