User Guide

Upgrading Your Server 9-37
8. Assemble the server.
9. Turn on the power of the server. Make sure that no error message appears in the POST.
If POST displays an error message, take a note on the message and see the POST error
messages listed in Chapter 8.
10. Run the BIOS SETUP and select [Advanced] → [Memory Configuration] to verify that
the installed DIMM shows the status "Normal". (See Chapter 4 for details.)
11. Select "Yes" for [Reset Configuration Data] on the [Advanced] menu.
This is required to update the hardware configuration information. See Chapter 4 for
details.
12. If Windows Server 2003 is in use, set the paging file size to the recommended value or a
greater value. See Chapter 5 for details.