User's Manual

6-14 Installing Optional Internal Devices

How to Attach the Motherboard

To attach the motherboard, follow the removal procedure in the reverse order. Be careful of the

following points.

a. Check cables, confirm that wires are not pressed, install all connectors, etc.

b. Do not bend the spring for EMI and a gasket.

c. Use clamps to connect cables after Motherboard is installed.

d. Follow the instructions below to attach a Heat Sink

The Retention module can be removed by using a minus driver or the removing clip tool.

Socket with dust cover (sponge) removed

Lever

1. Pull up the lever.

3. Push the lever back down and fix

rocessor.

2. Install a processor.