Release Notes

Express5800/120Ed System Release Notes 3
Introduction
These System Release Notes cover the following topics:
!
General Comments
!
Advisories
General Comments
The following general comments apply to this server.
!
Versions of the Network Operating Systems tested and recommended are:

Windows 2000
®

Windows NT
®
4.0 Server with Service Pack 6

Novell
®
NetWare
®
5.1

SCO OpenServer
™
5.05 with Maintenance Supplement 505A.

UNIXWare
®
7.1.1
Advisories
This section contains advisories on the EXPRESSBUILDER, Documentation,
Network Operating Systems, and SCO.
EXPRESSBUILDER
!
After installation, the Windows 2000 Device Manager may show an NEC
GEM SCSI Processor Device and/or an Unknown Device under Other
Devices. The Unknown Device is referenced on the baseboard management
controller. Both of these conditions can be cleared by installing the
ESMPRO Agent.
!
If you already have an operating system installed when creating a
maintenance partition, EXPRESSBUILDER will warn you of the existing
partition. If you want to preserve the installed operating system, do not
create the maintenance partition or the existing operating system will be
overlaid by the maintenance partition.
!
EXPRESSBUILDER EasySetup always configures the Windows 2000
TCP/IP Protocol IP settings to "Obtain an IP address automatically"
(DHCP), regardless of the IP address setting specified in EasySetup. If static
TCP/IP addressing is required, TCP/IP must be reconfigured. Refer to
Windows documentation for instructions.
!
The Administrator Menu in the System Information Management segment
of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.