Manualshelf

User's Guide

ManualsBrandsNEC ManualsserversNEC Express5800/120Li
25262728293031323334
Note 29
– Change both Agent and Manager settings when you change the port number for the
Report to Manager(TCP/IP In-Band). The setting method is as follows.
<Agent>
a) Click the “Setting” - “Destination Setting” menu on Alert Manager, then you can see
Destination Setting dialog showed.
b) Select the “TCP/IP In-Band” and Click the “Modify ID” button on Destination
Setting dialog, then you can see ID Setting dialog showed.
c) Click the “Address” button on ID Setting dialog, then you can see Manager(TCP/IP
In-Band) Setting dialog showed.
d) Set the port number to “Port Number” on Manager(TCP/IP In-Band) Setting dialog.
<Manager>
a) Click the “Setting” - “Base Setting” menu on Alert Manager, then you can see Base
Setting dialog showed.
b) Select the “Receive from Agent(TCP/IP)” and Click the “Configure” button on Base
Setting dialog, then you can see Receive from Agent(TCP/IP) setting dialog showed.
c) Set the port number to “Port Number” on Receive from Agent(TCP/IP) Setting
dialog.
– Change both Agent and Manager settings when you change the port number for the
Report to Manager(TCP/IP Out-of-Band).
<Agent>
a) Click the “Setting” - “Destination Setting” menu on Alert Manager, then you can
see Destination Setting dialog showed.
b) Select the “TCP/IP Out-of-Band” and Click the “Modify ID” button on Destination
Setting dialog, then you can see ID Setting dialog showed.
c) Click the “Address” button on ID Setting dialog, then you can see Manager(TCP/IP
Out-of-Band) Setting dialog showed.
d) Set the port number to “Port Number” on Manager(TCP/IP Out-of-Band) Setting
dialog.
<Manager>
a) Click the “Setting” - “Base Setting” menu on Alert Manager, then you can see Base
Setting dialog showed.
b) Select the “Receive from Agent(TCP/IP)” and Click the “Configure” button on
Base Setting dialog, then you can see Receive from Agent(TCP/IP) setting dialog
showed.
c) Set the port number to “Port Number” on Receive from Agent(TCP/IP) Setting
dialog.
– "Undetermined" means that the unoccupied port at the communication start-up will be
selected.