Basic manual

ManualsBrandsNEC ManualsserversNEC Express5800/120Rg-1

NEC

Express5800

120Rg-1

The NEC Express5800/120Rg-1 supports up to two Quad-

Core Intel

Xeon

5300 series processors* or up to two

Dual-Core Intel

Xeon

5100 series processors. Powered by

the multi-core Intel

Xeon

processors that enable data-

intensive processing, the 120Rg-1 delivers improved

application performance within the same physical space.

*2.5-inch SAS disk mode only.

Delivering up to 48GB (4GB x12) of memory capacity, the

120Rg-1 employs DDR2-667 Fully-Buffered DIMM memory

with ECC, Chipkill

, mirroring, and on-line sparing

capabilities.

To provide high-performance internal storage, the 120Rg-1

supports hot-swap 3.5-inch and 2.5-inch Serial Attached SCSI

(SAS) disk drives, with maximum capacities of 900GB (300GB

x3) and 879GB (146.5GB x6) respectively. The 120Rg-1 is also

available with hot-swap Serial ATA2 disk drives, with up to

2.25TB (750GB x3). Both the SAS and the SATA2 models allow

RAID 0 and 1 as standard and RAID 5 as option.

Along with one 64bit/100MHz PCI-X slot, the 120Rg-1 supports

one PCI EXPRESS

x8 slot as standard. By installing an

optional riser card, you can replace the 64bit/100MHz PCI-X

slot with a PCI EXPRESS

x8 slot.

To ensure continuous system operation, redundant hot-swap

power supplies are supported as option on the SAS models.

Redundant fans are supported as standard on both the SAS

and the SATA2 models (not hot-swappable).

To enhance RAS (Reliability, Availability and Serviceability)

functionality, the 120Rg-1 comes standard with the

EXPRESSSCOPE Engine. This feature allows the user to

monitor the status of a managed server and operate its KVM

(Keyboard, Video, and Mouse) devices from a remote console

via LAN.

Bundled for easy system management, NEC ESMPRO

monitors and controls system operation from the remote

console, and assists the administrator in troubleshooting the

system. For simple system installation, NEC EXPRESSBUILDER

is attached as an installation support tool.

Product Highlights

www.necam.com/servers

■

Provides small to medium businesses

with outstanding performance, reliability

and availability while offering advanced

cost performance in a 1U rack form factor

■

Supports Multi-Core Intel

Xeon

processors for powerful processing

■

EXPRESSSCOPE Engine provides

enhanced RAS functionality while

optimizing your management cost

Summary of content (2 pages)

PAGE 1
NEC Express5800/120Rg-1 ■ Provides small to medium businesses with outstanding performance, reliability and availability while offering advanced cost performance in a 1U rack form factor ■Supports Multi-Core Intel ® Xeon ® processors for powerful processing ■EXPRESSSCOPE Engine provides enhanced RAS functionality while optimizing your management cost Product Highlights The NEC Express5800/120Rg-1 supports up to two QuadCore Intel® Xeon® 5300 series processors* or up to two Dual-Core Intel® Xeon® 5100 serie
PAGE 2
NEC Express5800/120Rg-1 Hardware Specification Quad-Core Intel® Xeon® Processor*1 X5355 (2.66GHz/1333MHz FSB/2x4MB L2 Cache) E5345 (2.33GHz/1333MHz FSB/2x4MB L2 Cache) Dual-Core Intel® Xeon® Processor 5160 (3GHz/1333MHz FSB/4MB L2 Cache) 5130 (2GHz/1333MHz FSB/4MB L2 Cache) 5110 (1.60GHz/1066MHz FSB/4MB L2 Cache) CPU No. of CPU Expansion Slots Graphics 1-2 Intel® 64 Supported Chipset Intel® 5000P Maximum SATA2 and 3.5" SAS models : 670VA/660W Power Consumption 2.