User Guide

9-50 Upgrading Your Server

Installation

See the section "Preparing for Installation and Removal" described earlier to prepare.

2. Pull out the server from the rack.

3. Open the drive cover and logic cover.

4. While pulling the lever toward the right side of the server, pull the CD/FD out of the

chassis.

IMPORTANT: Do not touch any other part than release lever when

removing the CD-ROM/floppy disk drive. Otherwise, your fingers may

be caught.

5. While pushing the latching tab that secures the device bay, push the device carrier out of

front of the server.

IMPORTANT: Be careful not to bend the latching tab by applying

excess force. If the tab bends, straighten it out as it was.