User Guide

9-52 Upgrading Your Server

10. Secure the backup device with the provided screws.

Tighten two screws on each side.

NOTES:

 Be sure to use the screws provided with the backup device.

 Position the backup device so that the device screw holes align with

the screw holes in the device carrier.

 If you feel difficult to connect the cable of the long device such as

N8151-54F internal AIT, slide the device to the front and then

connect the cable.

11. Connect the power extension cable and interface cable to the device.

Screw hole not used

K410-130 (00)

SCSI Cable

Power Cable

(Attached)

IDE Cable

(Attached)

Power Cable

(Attached)