Planning Guide

System Documentation
Welcome to Site Planning for Express5800/320Fc systems 1-5
What are the lengths and types of the cables that will connect to your system?
Have you created a sketch of how you plan to arrange the system at the installation
site? Consider the available cable lengths, the placement of external devices, and
the location of network and voice communication connections.
On the sketch, show the following:
• Location of the system and its external components
• Power cords, and telephone and interface cables
• Locations of AC power receptacles, phone jacks, Ethernet jacks, switches,
and/or hubs
N O T E
Make sure that all cords and cables are long enough to
reach between their respective components and
connectors. Route all cables out of the way of foot traffic.
Working with Other Groups
Have you provided your facilities group and contractors with the sketch and copies
of the following?
• Tables 4-2, 4-3, and 4-4, worksheets for determining AC power requirements
• Tables 4-5 and 4-6 or Tables 4-7 and 4-8, worksheets for determining the
number of external power outlets required
• Appendix B, “Electrical Circuit and Wiring Information”
• Any notes you have about site planning
Have you reviewed and discussed the requirements with the facilities personnel
and contractors to ensure that all site modifications are understood and
implemented?
If you have any questions about the number and types of components, contact your
Express5800/320
Fc account executive or distributor.