Planning Guide

UPS Planning 5-1
Chapter 5
UPS Planning
5-
For information about planning for an uninterruptible power supply (UPS) to use with
your Express5800/320
Fc system, see:
• “Qualified APC UPS Models” on page 5-1
• “Communicating with a UPS over a Network” on page 5-2
• “Connecting Power to Systems, PDUs, and a UPS” on page 5-2
• “Connecting a System Directly to a UPS” on page 5-3
Qualified APC UPS Models
NEC Corporation of America has qualified certain UPS models from American Power
Conversion Corporation (APC) for use with Express5800/320
Fc
systems. The
qualifiedAPC Symmetra and APC Smart-UPS models are listed in Tables 5-1,
and 5-3.
NOTE
Site planning information for the UPS, which you must
supply, is of a general nature only. Do not rely exclusively
on the UPS information in this document. Contact APC at
http://www.apcc.com for detailed UPS specifications,
documentation, and ordering information.
Table 5-1. APC Symmetra Models for PDUs or for Multiple Systems
Locale APC Symmetra Model
AC Power
Input
AC Power
Output
North America SYH2K6RMT-P1, SYH4K6RMT-P1,
SYH6K6RMT-P1, SYA8K16RMP, or
SYA12K16RMP
With SYA8K16RMP and SYA12K16RMP, also
order AP7582, a rack PDU extender.
120V 120V or 208V