Planning Guide

Network and Telephone Line Planning 6-1
Chapter 6
Network and Telephone Line Planning
6-
For information about planning network and telephone lines for your
Express5800/320
Fc system, see:
• “Network Cable Requirements” on page 6-1
• “Telephone Line Requirements” on page 6-2
• “Site Planning for Systems in an ftGateway Group” on page 6-3
Network Cable Requirements
Ethernet PCI adapters are typically supplied in pairs and teamed in software for fault
tolerance. Each member of the pair requires a cable.
WARNING
!
Make sure Ethernet cables can be routed out of the
way of foot traffic.
Tab l e 6- 1 describes the Ethernet cables you must supply. Be sure to provide a cable of
sufficient length for the distance between the system and a wall jack or hub.
NOTE
See the Express5800/3
20Fc: PCI Adapter Guide for
more information about the adapters NEC
Corporation
of America supplies for your Express5800/320Fc
system.