Installation & Configuration Guide

86
Set the IP address, Subnet Mask, Default Gateway IP and the Primary Name
Server as per your Network environment.
Step 7
Use the following command to activate the dual LAN card configuration of the
slot 7:
vndctl up 7
Step 8
Check the status using:
vndctl status
Dual LAN card configuration has completed when the screen displays the status
as “UP”, and the link is “LINK” (with LAN cable connected) as shown above.
Step 9
Execute the following command to check whether IP address is set correctly:
vndctl ipconf 7
This completes the steps to assign the IP address to the Dual 10/100 (100 Base)
Ethernet adapter.
DEVICE=ha0
ONBOOT=yes
BOOTPRONTO=static
IPADDR=10.123.187.1
NETMASK=255.255.255.0
GATEWAY=10.123.187.254