User's Guide

CRU Replacement and Server Upgrades 4-27
Rear Slot Cover
PCI Board
Retainer Bracket
Figure 4-28. Rear Slot Cover and Retainer Bracket Locations
8. Holding the PCI board by its top edge or upper corners, firmly press the
board into the PCI expansion slot on the PCI module board. The tapered foot
of the PCI board retaining bracket must fit into the mating slot in the
expansion slot frame. See Figure 4-29. Be sure to Align the PCI board with
the guide rail groove and insert the board slowly.
PCI Board
Figure 4-29. Installing the PCI Board.
NOTE: Check to see if the edge of the bracket (taper)
is inserted into a slot of the chassis. In the case of a
long board, check also to see if its other edge is
inserted into the bracket guide.
9. Install the PCI board retaining bracket. See Figure 4-30.