User's Guide

4.2.1.3 For the specified group

'load' command at the below target enables you to update all modules of components belonging to the

specified group<Group Name>. Refer to the section 4.1.3.1 for more information about this target.

• /grps/grpset/<Group Name>/expup

Specific option of this command is as follow.

Table 4-14 Specific options of '/grps/grpset/<Group Name>/expup'

Option Description

-exclude Specifies components or groups that are not included in this operation.

-reboot Enables NEC ExpressUpdate to reboot the system if the update requires it.

CHECK：

• In the case of the user authority is Operator, "Install Update Packages" of the user level

must be enabled.

Example

`load /grps/grpset/<Group Name>/expup` command enables you to update all modules of components

belonging to the specified group<Group Name>.

-> load -exclude cmp=Server02 /grps/grpset/root/expup

COMMAND COMPLETED

Updating was started. Run the show command to the each module element and you can confirm this

command's progress from ExpUpStatus property. Run the show command to the each module element and

you can confirm this command's result from LatestApplyResult property.

4.2.1.4 For the specified group and module

'load' command at below targets enables you to update the specified module <Module Name> of components

belonging to the specified group <Group Name>. Refer to the section 4.1.1.2 for more information about this

target.

• /grps/grpset/<Group Name>/expup/mods/<Module Name>