User's Guide

4.2.4 Cancelling update commands
4.2.4.1 For components
'stop' command at below targets enables you to cancel updates. Refer to the section 4.1.1.1 for more
information about this target.
• /cmps/<Component Name>/map/expup
There is no specific option for this command.
CHECK：
• In the case of the user authority is Operator, "Install Update Packages" of the user level
must be enabled.
TIP:
• This command effects only waiting tasks. A task which has been started is unable to be
cancelled.
Example
`stop /cmps/<Component Name>/map/expup` command enables you to cancel updates of the specified
component <Component Name>. If this command is successful, a list of cancelled tasks is shown.
-> stop /cmps/Server01/map/expup
COMMAND COMPLETED
/cmps/Server01/map/expup/mods/"NEC ExpressUpdate Agent"
Cancel of update process was executed.
4.2.4.2 For groups
'stop' command at below targets enables you to cancel updates. Refer to the section 4.1.1.2 for more
information about this target.
• /grps/grpset/<Group Name>/expup
There is no specific option for this command.
CHECK：
• In the case of the user authority is Operator, "Install Update Packages" of the user level
must be enabled.
Example
`stop /grps/grpset/<Group Name>/expup` command enables you to cancel updates of components belonging
to the specified group <Group Name>. If this command is successful, a list of cancelled tasks is shown.
-> stop /grps/grpset/root/expup
COMMAND COMPLETED
/cmps/Server01/map/expup/mods/"BMC Firmware"
/cmps/Server01/map/expup/mods/"NEC ExpressUpdate Agent"
/cmps/Server02/map/expup/mods/"NEC ExpressUpdate Agent"
Cancel of update process was executed.
34