User's Guide

Examples
When you modify location of the repository in remote, run the following command in the remote repository
settings have been set.
set /repository RepositoryLocation=REMOTE
CHECK：
• When you set RepositoryLocation in REMOTE, you should set remote repository settings
beforehand. See 4.3.1.2Remote repository settings.
• In the case of the user authority is Operator, "Change Environment Setting" of the user
level must be enabled.
4.3.1.1 Local repository settings
You can view and change Manager PC repository settings. Local repository settings are located at the
following target.
• /repository/localsetting
Properties and specific commands of this target are as follows.
Table 4-20 Properties of '/repository/localsetting'
Property Access Description
RepositoryPassword read/write Sets the password to access repository. This is
displayed in "*****".
AutoUpdate read/write Sets the automatic updating of the repository. The
valid values are:
• INVALID
• VALID – the repository downloads update
packages.
UpdateInterval read/write Sets the schedule type when "AutoUpdate" is
"VALID". The valid values are:
• DAILY
• EVERY_SUNDAY
• EVERY_MONDAY
• EVERY_TUESDAY
• EVERY_WEDNESDAY
• EVERY_THURSDAY
• EVERY_FRIDAY
• EVERY_SATURDAY
UpdateStartTime read/write Sets downloading time when "AutoUpdate" is
"VALID". The valid ranges are:
• 00:00 ~ 23:50
Time must be set by the 10 minute.
ProxyAddress read/write Sets the IP address of the proxy server.
ProxyPort read/write Sets the port number of the proxy server.
ProxyUser read/write Sets the user name with which the repository
connects to the proxy server.
ProxyPassword read/write Sets the user password with which the repository
connects to the proxy server. This is displayed in
"*****".
Table 4-21 Specific commands of '/repository/localsetting'
Command Description
set Sets local repository settings properties.
36