User's Guide

Examples
'show' command enables you to view local repository settings.
-> show /repository/localsetting
ufip=/repository/localsetting
ufit=localsetting
Targets:
Properties:
RepositoryPassword=*****
AutoUpdate=VALID
UpdateInterval=EVERY_SATURDAY
UpdateStartTime=23:50
ProxyAddress=-
ProxyPort=0
ProxyUser=-
ProxyPassword=-
Verb s:
cd
exit
help
show
set
Examples
'set' command enables you to set one or more local repository settings properties. If there are multiple
properties on the same command line, they must be separated by a space.
When you enable automatic downloading, run the following command.
set /repository/localsetting AutoUpdate=VALID
When you set the schedule type, run the following command.
set /repository/localsetting UpdateInterval=EVERY_SATURDAY
When you set downloading time, run the following command.
set /repository/localsetting UpdateStartTime=23:50
When you set the IP address and the port number of the proxy server on the same command line, run the
following command.
set /repository/localsetting ProxyAddress=192.168.0.200 ProxyPort=8080
CHECK：
• In the case of the user authority is Operator, "Change Environment Setting" of the user
level must be enabled.
37