User's Guide

About This Document
This document introduces command line interface of NEC ExpressUpdate. It is a function of the component
management utility "NEC ESMPRO Manager".
Before attempting to operate the command line interface, read this document so as to gain an adequate
understanding of the contents.
 Attention
This document is intended for persons who are familiar with the operating system's functions and operations
and the network's functions and setup. For operations and inquiries about the operating system, see its online
help information.
This document covers universal information about generally managed components. The notes and restrictions
on use of each product as a managed component are explained in the user's guide provided with the managed
component.
Names used with screen images in this document are fictitious. They are unrelated to existing product names,
names of organizations, or individual names. The setting values on the screen images are shown as examples,
so setting values such as IP addresses on screen images are not guaranteed for operation.
 About Symbols in This Document
The following explains three symbols that are used in this document:
IMPORTANT:
Points that are mandatory or require attention when using the software or the
component.
CHECK:
Points that are require confirmation when using the software or the component.
TIP:
Helpful and convenient piece of information.
 About Font in This Document
The Italic font shows the option of command in this document.
 For other information about the NEC ESMPRO Manager
See the documents below.
NEC ESMPRO Manager Ver.5 Installation Guide
NEC ESMPRO Manager Ver.5 Setup Guide
NEC ESMPRO Manager Ver.5 Command Line Interface
4