Express5800 series System Configuration Guide Express5800/R320a-E4,R320b-M4 (Windows2008 R2 model) [2010.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) R320a-E4/R320b-M4 (Windows2008 R2 model) Fault Tolerant technology GeminiArchitecture™ •Intel® Xeon® Processor E5504(R320a-E4)/ X5670(R320b-M4) •4U Rackmount form factor •Windows Server® 2008 R2 Enterprise and Hyper-V supported Model NEC Express5800/R320a-E4 Product Code CPU*1 Type N8800-155F N8800-154F Intel® Xeon® Processor E5504 Intel® Xeon® Processor X5670 2GHz Clock Speed L3 Cache Core and Thread (per processor) Chipset 4MB 12MB 4C/4T 6
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Low-End Rack mount model N8800-155 Express5800/R320a-E4(4C/E5504-W28EX64) no-Memory, no-HDD Intel® Xeon® Processor E5504 (2.0GHz) x1, 4MB 3rd cache, QPI speed 4.8GT/s no-Memory, no-HDD, DVD-RAM drive x1, 1000BASE-T 2ch, PCI slot x2 Windows Server 2008 R2 Enterprise supported.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) R320a-E4, R320b-M4 External Design 450 689 736 483 178 Tower conversion kit 220 804 592 327 4
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) R320a-E4 Quick configuration sheet CPU/IO module#0 Empty Empty Empty CPU socket×2 Empty Empty Empty Intel® Xeon® Processor E5504 Empty Empty Empty Empty Empty Empty Empty Arrange at least one DIMM slots x12 LAN 1000BASE-T x1 1000BASE-T x1 Management LAN ×１ #2 Empty Low-profile PCI-Express x4 x2 (x8 socket) 2.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) R320b-M4 Quick configuration sheet CPU/IO module#0 Empty Empty Empty CPU socket x 2 Empty Empty Empty Intel® Xeon® Processor X5670 Empty Empty Empty Empty Empty Empty Empty Arrange at least one DIMM slots x12 LAN 1000BASE-T x1 1000BASE-T x1 Management LAN #4 Empty #3 Empty Full-height PCI-Express x4×2 (x8 socket) #2 Empty 2.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) CPU CPU socket Intel® Xeon® Processor E5504 / X5670 N8801-041 2GHz, Set of CPU x2 N8801-043 2.93GHz, Set of CPU x2 Set of CPU x2 Note)Select the same CPU as the standard CPU.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Internal HDD Diskbays Be sure to install by double of hard disk drives in order to have the RAID-1 configuration. Also, both of the hard disk drives must have same capacity and rotational speed. N8850-042 N8850-043 N8850-044 N8850-045 N8850-046 146.5GB HDD (10,000rpm) 300GB HDD (10,000rpm) 600GB HDD (10,000rpm) 73.2GB HDD (15,000rpm) 146.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Display D-sub 15 pin Interface Local procurement. Display is NOT provided with the main unit. Please arrange locally. Keyboard USB N8870-002AF Keyboard (USB) (Cable length 1.8m) Not included in the main unit. USB cable [K410-177(1A)] (1.5m) Arrange as needed. Mouse Connect via keyboard N8870-010A Mouse (USB) (Cable length 1.8m) Not included in the main unit. [Notes for Keyboard/Mouse] Do not connect non-NEC-authorized USB devices.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) DVD-RAM DVD-RAM DVD-RAM drive (Standard) [Notes for DVD-RAM drive] The writing software is not provided for the DVD drive. KVM switch unit Required when connecting two or more servers. N8191-10F KVM switch unit(8Server/USB) *When Keyboard/Mouse do not work after fail over of CPU/IO module, disconnect and reconnect the USB cable or press the reset switch of the KVM Switch.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) 17 inch LCD console unit USB Interface D-sub 15pin Interface Switch Unit Connection Cable Set (1.8m/3m/5m) [K410-118(1A)] (1.8m) [K410-118(03)] (3m) [K410-118(05)] (5m) •Up to eight servers can be connected directly to the LCD console unit. Use optional Server Switch Units to connect more than eight servers. LCD Console Unit A 17-inch LCD, keyboard, mouse, and Server Switch Unit (x8) are integrated into the 1U LCD Console Unit.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) LAN CPU/IO module#0 Onboard 1000BASE-T 2x Standard LAN ports per CPU/IO module. LAN port #1 LAN port #2 Be sure to connect four physical LAN interfaces to the network HUB. Each of two pairs of 1000BASE-T on the CPU/IO module is redundant configuration.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Storage D3-10/D4-30/D8-10/D8-20/D8-30/E1-10 Note! - Be sure to procure the control software according to the sales region.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Tape backup SCSl controller [N8803-036] CPU/IO module#0 Device Expansion Unit [N8141-41F] PCI-Ex slot Power Unit [N8181-54F] SCSI cable 1m [K410-94(01)] 2m [K410-94(02)] N8151-51A Built-in DAT(DAT72)(36GB) N8151-59 Built-in LTO(200GB) N8151-76 Built-in LTO(400GB) Double backup configuration Device Expansion Unit [N8141-41F] [Notes for double backup] (1)Backup job There are the following notes for double backup configuration.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) SAS controller [N8803-037] CPU/IO module#0 Device Expansion Unit [N8141-41] Internal SAS cable [K410-163(00)] PCI-Ex slot SAS cable 2m [K410-168(02)] N8151-101 Built-in LTO(LTO2) N8151-102 Built-in LTO(LTO3) N8151-90 Built-in LTO(800GB) N8151-77 Built-in LTO(800GB) Power Unit [N8181-54F] Double backup configuration Device Expansion Unit [N8141-41F] [Notes for double backup] (1) Backup job There are the following notes for double backup config
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Supported software for tape backup The following table shows the support matrix of backup software and backup devices.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Supported PCI cards and installable slots R320a-E4 O: Supported CPU/IO module Product code Low-Profile Slot#1 Slot #2 Notes N8804-007 1000BASE-T 2ch board kit - - For previous R320a only N8804-009 1000BASE-T 2ch board kit O O *1 N8803-036 SCSI board O O *2 N8803-037 SAS board O O *2 - - For previous R320a only O O *1 N8803-035 N8803-038 FibreChannel controller (4Gbps) FibreChannel controller (8Gbps) *1: Be sure to instal
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) UPS [Note] - Be sure to manage the UPS via network with Network shutdown software. The UPS can not be managed via serial port and USB port with Power Chute Plus software.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Example configuration (UPS Redundant ): NEC Express5800/R320a-E4, R320b-M4 [N8800-155F/154F] LAN 450VA/400W Device Expansion Unit [N8141-41F] 700VA/695W 700VA/695W APC UPS (1500VA) Control Network management Card APC UPS (750VA) Note) The UPS can not be managed via serial port and USB port with Power Chute Plus software.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Tower conversion kit N8843-003 Tower conversion kit 23 inch height pedestal rack with Front bezel for R320a/R320b 327(W)x 804(D)x 592(H)mm, 27kg (including stabilizer) Operating System - Microsoft Windows Server® 2008 R2 Enterprise (1-2 Processor, 25CAL Version) UL0999-436EN UL0999-436CT UL0999-436CS UL0999-436KR English Chinese Traditional Chinese Simplified Korean 20
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Notes for using Hyper-V System halt Time when Duplexing CPU Module In the synchronization process of CPU modules, a memory copy is performed to duplex memory on both CPU modules. Some part of memory area can be copied without stopping the system while the other part requires the system to stop. When using Hyper-V, the system cannot use the function to copy without stopping the system.
Express5800/R320a-E4, R320b-M4(Windows2008 R2 model) Notes for using Hyper-V Backup When using Hyper-V on FT server, prepare a separate server for backup. For backup patterns, refer to each backup software company's web site. NEC ESMPRO Agent For monitoring guest OS, NEC ESMPRO Agent for Guest OS is required. Active Upgrade A team assigned to the virtual network by Hyper-V Virtual Network Manager cannot be used in Active Upgrade. To use Active Upgrade, at least two teams are required.
