Operation Manual

Messaging
115
the signalling process. If you receive an urgent message during a call, a
repeated alert tone sounds.
Emergency messages
Emergency messages require receipt confirmation Ŕ see Confirming
receipts (page 115). An activated keypad lock temporarily deactivates
after you receive an emergency message so you can acknowledge the
receipt. The handset shows emergency messages immediately on the
display.
Unless you disable the ringer, a melody plays when you receive an
emergency message. The ringer volume increases to the maximum
during the signalling process. If you receive an emergency message
during a call, a repeated and in volume increasing alert tone sounds.
Note: It is not possible to send emergency message from the
G955/I755 DECT handset.
Confirming receipts
You must confirm the receipt of urgent and emergency messages. If
you do not confirm the message within 60 seconds, the initiator
receives a message that indicates the message was not delivered.
When you receive an urgent/emergency message, choose one of the
following options:
1. Press the Ok soft key.
OR
1. Press the Delete soft key.
All other keys remain blocked until you confirm the
message with OK or Delete.
Message list full
The message list can store a maximum of 80 messages; if it is full, an
info message “Storage full” appears on the display and the system
handles a new message according to the overwrite setting. For more
information about overwrite settings, see Configuring the Overwrite old
option (page 109).