LCD Projector User's Manual GT1150

E – 38
When Switcher Control is turned on:
Advanced Menu
Source Select
Picture
Volume
Image Options
Projector Options
Tools
Help
Test Pattern
1.RGB1
2.RGB2
3.Video1
4.Video2
5.S-Video
6.DVI (DIGITAL)
7.DVI (ANALOG)
8.PC Card Viewer
more
Entry List
9.RGB1 (Video)
0.RGB1 (S-Video)
RGB2 (S-Video)
RGB2 (Video)
Brightness / Contrast / Color / Hue / Sharpness
Volume
Keystone
Color Temperature
Lamp Mode
Gamma Correct
Advanced Options
Factory Default
Timer
Menu
Setup
Link Mode
Switcher Control
LAN Mode (option)
Capture
PC Card Files
Contens
Information
Cross Hatch, Gray Bars, Color Bars,
Black Raster,Gray Raster, White Raster,
ANSI Checker, Focus, Aspect Ratios
Red/Green/Blue
Source Name / Input Terminal / Entry No. /Horizontal Frequency / Vertical Frequency / Sync Polarity
Signal Type / Video Type / Sync Type / Interlace / Resolution / Direct Key
Aspect Ratio / Gamma Correction / Noise Reduction / Color Matrix/Matrix Type
Lamp Remaining Time / Lamp Hour Meter / Filter Usage / Projector Usage / Projector ID
Version (BIOS / Firmware / Data / SUB-CPU)
Link Mode (Master / Slave)
High-Bright/Eco
Normal / Natural 1 / Natural 2
All Data / Current Signal
On/Off Timer
Sleep Timer
Page1
Page2
Page3
Menu Mode (Basic / Custom Menu, Advanced Menu, Service Menu)
Basic/Custom Menu Edit
Language (English / German / French / Italian / Spanish / Swedish / Japanese)
Menu Display Time (Manual / Auto 5 sec / Auto 10 sec / Auto 30 sec)
Display Select Date (On / Off) Time (On/Off)
Input Terminal (On / Off) Source Name (On / Off)
Projector ID (On / Off)
Date Format (MM/DD/YYYY, MM/DD/YYYY ddd, DD/MM/YYYY, DD/MM/YYYY ddd,
YYYY/MM/DD, YYYY/MM/DD ddd, Month DD,YYYY, Month DD,YYYY ddd)
Data, Time Preset
Projector Pointer (Pointer 1 – 8)
Direct Button Volume Bar (On / Off)
Keystone Bar (On / Off)
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Standalone/Master/Slabe
Standalone / SW 1 Level / SW 2 Level
Network Board / Default Gateway
Contens
Orientation (Desktop Front / Ceiling Rear / Desktop Rear / Ceiling Front)
Background (Blue / Black / Logo)
PC Card Viewer Options Show Folder List (Auto Play / Manual Play)
Interval (5-300 sec)
Capture Options (High Quality / Normal / High Compression)
Signal Select RGB1 (Auto / RGB / Component)
RGB2 (Auto / RGB / Component)
Video1 (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
Video2 (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
S-Video (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
Signal Select RGB1 (Video) (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
RGB1 (S-Video) (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
RGB2 (Video) (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
RGB2 (S-Video) (Auto / NTSC3.58 / NTSC4.43 / PAL / PAL60 / SECAM)
Auto Adjust [RGB Only] (On / Off) Auto Start (On / Off)
Power Management (On / Off) Power Off Confirmation (On / Off)
Keystone Save (On / Off) Fan High Speed Mode (On / Off)
Built-in Speaker Clear Lamp Hour Meter
Clear Filter Usage
Remote Sensor (Front / Back / Left / Right)
S-Video Mode Select (Off / S2)
Communication Speed (4800 / 9600 / 19200 / 38400)
Projector ID (Enable / Disable) 1-64
Default Source Select (Last / Suto / Select)
(RGB1 / RGB2 / Video1 / Video2 / S-Video / DVI [DIGITAL] / DVI [ANALOG] / PC Card Viewer/
RGB1 [Video] / RGB1 [S-Video] / RGB2 [Video] / RGB2 [S-Video] )
[SW 1 Level] (Slot1–10)
[SW 2 Level] (M-01 S-01 – M-10 S-10)
Execute Switch (Active / Inactive), Edit
Preset Time (Off / 0:30 / 1:00 / 1:30 / 2:00)
Aspect Ratio
Noise Reduction
Color Matrix
White Balance
Switcher Gain
Position/Clock
Resolution
Video Filter
Overscan
Clamp Timing
Y/C Delay
YTR Adjustment
CTR Adjustment
HD Delay
1.33:1 / 1.78:1 / 1.85:1 / 2.05:1 / 2.35:1
Off / Low / Medium / High
Select Color Matrix HDTV/SDTV
Select Color Matrix Type B-Y/R-Y,Cb/Cr,Pb/Pr
Brightness R/G/B, Contrast R/G/B
Red / Green / Blue
Horizontal / Vertical / Clock / Phase
Auto / Native
On / Off
0% / 5% / 10% / 25%
Auto / Tri-Sync / Front Porch
(-8 – +8)
Gain (0–7)
Gain (0–7)
On / Off
Switcher
Entry List
Menu tree