Operation Manual

E-23

Selecting a Source

Selecting the computer or video source

Using the cabinet buttons

Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the

SOURCE button is pressed, each source name will be highlighted in sequence.

Press the SOURCE button.

Using the Remote Control

LAMP

STATUS

POWER

AUTO

ADJ.

ON/STAND BY

SELECT

SOURCE

POWER

OFF ON

COMPUTER

COMPONENT

AUTO

AUTO ADJ.

S-VIDEO

C-VIDEO

VIDEO

COMP.

NOTE: If no input signal is available, the projector will display a blue background (factory preset).

Press any one of the VIDEO , S-VIDEO , C-VIDEO or COMP. buttons.

3. PROJECTING AN IMAGE (BASIC OPERATION)

Adjusting the Picture Size and Position

Place your projector on a flat level surface and ensure that the projector is square to the screen.

Lift the front edge of the projector to center the image vertically.

* If the projected image does not appear square to the screen then use the Keystone feature for proper adjust-

ment. See page E-26.