User’s Manual 13" True Color TFT LCD Monitor 13" True Color TFT LCD Monitor NEC Technologies, Inc. 1255 N. Michael Drive Wood Dale, Illinois 60191-1094 Part No. Printed in U.S.A.
LCD1280 10/29/99 9:25 AM Page 2 Information for LCD1280 WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
LCD1280 10/29/99 9:25 AM Page 3 Introduction formance necessary for today’s sophisticated Windows, Macintosh, Silicon Graphics, Sun and other workstation applications. Contents of Package Congratulations on your purchase of the NEC LCD1280™ True Color monitor! In addition to offering support for VGA graphics mode (640 x 480), the LCD1280 supports WS high resolution mode (1280 x 1024). The LCD1280 automatically detects and changes between WS high resolution mode and VGA graphics mode.
LCD1280 10/29/99 9:25 AM Page 4 Introduction Low Power Consumption The LCD1280 has been designed with NEC’s IPM™ (Intelligent Power Manager) System. When utilized with an Energy Star system or video card, the LCD1280's IPM System is an innovative power saving utility that complies with both the EPA’s Energy Star requirements and Europe’s NUTEK’s power management requirements. different IPM modes.
LCD1280 10/29/99 9:25 AM Page 5 Introduction LCD1280 Specifications Display Colors: User Controls: Signal Cable: Power Supply: Power Consumption: Dimensions (W, H, D): Weight: Unlimited colors (depends on graphics interface and/or application) Tilt Rotation: Up: 25 degrees Down: 5 degrees Environmental: Operating temperature: Storage temperature: Power, brightness, horizontal position, vertical position, clock delay adjust 15-pin mini D-sub male to 5 branched BNC male AC 90 to 264 V worldwide input,
LCD1280 10/29/99 9:25 AM Page 6 Installation 5. Make sure the appropriate BNC cable is used. Should the graphics adapter require a connector other than the 15 pin mini D-sub male included with the monitor, please call NEC at (800) 820-1230. Connect cable to system. 6. Connect BNC cables as follows according to the input video mode selected above. (Note: incorrect cable connections may result in irregular operation, damage display quality/ components of LCD module, and/or shorten the module’s life.
LCD1280 10/29/99 9:25 AM Page 7 Controls Fine VGA Horizontal Adjust (V-H2): fine adjustment for horizontal position of VGA mode (2 pixel / 1 dot increment per operation). Rough VGA Vertical Adjust (V-V1): rough adjustment for vertical position of VGA mode (32 pixel / 16 line increment per operation). Fine VGA Vertical Adjust (V-V2): fine adjustment for vertical position of VGA mode (2 pixel / 1 line increment per operation).
LCD1280 10/29/99 9:25 AM Page 8 Troubleshooting/Support Technical Support FastFacts™ FastFacts system is an easy-to-use, automated facsimile service that provides you with information whenever you need it, 24 hours a day, seven days a week. You can call the FastFacts system with your touchtone telephone, order a catalog listing the available documents, or order the document you need. Within minutes, your requested information will be sent to your fax machine.
LCD1280 10/29/99 9:25 AM Page 9 Troubleshooting/Support Limitation of Damages and Implied Warranties For Information, Telephone 1-800-388-8888 NOTE: All Products returned to NECTECH for service MUST have prior approval; this may be obtained by calling the above number. NECTECH’S SOLE LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT AT OUR OPTION. NECTECH SHALL NOT BE LIABLE FOR: This Product is warranted in accordance with the terms of this limited warranty.
LCD1280 10/29/99 9:25 AM Page 10 Appendix 2 Signal Timings Input Signal Timings (WS High Resolution Mode) Item Abbreviation Monitor Rating Pixel frequency fc 107.5MHz ± 50ppm 9.302nsec/pixel 107.352HHz ± 50ppm 9.315nsec/pixel Horizontal frequency fh 64.60KHz Line Time total Th 15.479usec 1664CLK 15.649esec 1680CLK Horizontal active display Thd 11.907usec 1280CLK 11.923usec 1280CLK Horizontal sync pulse Thp 1.786usec 192CLK 1.118usec 120CLK Horizontal baack porch Thb 1.
LCD1280 10/29/99 9:25 AM Page 11 Appendix 2 H-Video V-Video Tvd Thd Horizontal Vertical Thp Thb Thf Tvp Tvb Tvf Th Tv Fig. A2-1: Horizontal Timing Fig. A2-2: Vertical Timing V sync H sync Th H sync 2.0V 0.8V Thrf Thrf Fig. A2-3: Sync Timing 16 Appendix 3 Signal levels Min. Typ. Max. – – 0.765V Setup level (Black – Blank) 0.035V 0.054V 0.072V White level (White – Black) 0.627V 0.660V 0.694V .
LCD1280 10/29/99 9:25 AM Page 12 References Analog Interface BNC Cables Brightness Control Compatibility Composite Sync Dimensions Display Area Display mode Dot Pitch ErgoDesign FastFacts FCC Focus Graphics Board Graphics Standards Input Mode Installation LED indicator Magnetic Fields MPR Pin Assignments Position Controls Power Consumption Power Supply Reduced Footprint Reduced Magnetic Field Technology Remote Bulletin Board System (BBS) Resolution Separate Sync Signal Levels Signal Timings Specifications
