Datasheet

English-4
3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position (Figure C.1).
4. Connect all cables to the appropriate connectors (Figure C.1).
5. For successful cable management, place the cables in this order into the cable management: Power cord and DVI cable
(Figure C.2).
6. Place power cord and audio cable into the specific hooks indicated in Figure C.2.
7. Place the DVI cable and D-Sub cable into the specific hooks indicated in Figure C.2.
Highest
Stand
Position
30˚ Tilt
DVI Cable
Power Cord
Insert Top First
Figure C.1 Figure C.2
8. Make sure all cables are resting flat against the stand (Figure C.3).
Figure D.1
Figure D.2
DVI Cable
Flat
Figure C.3
9. Hold the all cables firmly and place the cable cover onto the stand (Figure D.1). To remove the cable cover, lift the cover
off as shown in Figure D.2.
D-SUB Cable
DVI Cable
Power Cord
Audio In
DVI
D-Sub
Audio Cable
D-Sub CableAudio Cable
Power cord