Display Solutions, Ltd. User's Manual Monitor LCD2180

English-10
Specifications
Monitor Specifications SpectraView LCD2180 Notes
WideGamut LED Monitor
LCD Module Diagonal: 54 cm/21.3 inches Active matrix; thin film transistor (TFT) liquid
Viewable Image Size: 54 cm/21.3 inches crystal display (LCD); 0.270 mm dot pitch;
Native Resolution (Pixel Count): 1600 x 1200 200 cd/m
2
white luminence; 430:1 contrast ratio,
typical.
Input Signal Video: Digital Input DVI
Display Colours 16,777,216 Depends on display card used.
Synchronization Range Horizontal: 75 kHz
Vertical: 60 Hz
Viewing Angle Left/Right: ±88° (CR > 10)
Up/Down: ±88° (CR > 10)
Image Formation Time 20 ms (Typ.)
Resolutions Supported 1600 x 1200 at 60 Hz
Active Landscape: Horiz.: 432 mm/17.0 inches
Display Area Vert.: 324 mm/12.8 inches
Power Supply AC 100-240 V ~ 50/60 Hz
Current Rating 1.1 - 0.5 A
Dimensions Landscape: 473 mm (W) x 461.7 mm (H) x 211.9 mm (D)
18.6 inches (W) x 18.2 inches (H) x 8.3 inches (D)
Weight 18.3 kg (40.3 lbs)
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Feet: 0 to 12,000 Feet/0 to 3,658 m
Storage Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 10% to 85%
Feet: 0 to 40,000 Feet/0 to 12,192 m
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.