Datasheet

English-8

Figure S.4

5. Remove the stand (Figure S.4).

The monitor is now ready for mounting in an alternate manner.

6. Connect the cables to the back of the monitor.

7. Reverse this process to re-attach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Handle with care when removing stand.

Flexible Arm Installation

This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm:

1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2. Using the 4 screws to attach the arm to the monitor (Figure F.1).

NOTE: The LCD monitor should only be used with an approved arm (e.g. GS mark). To meet the safety requirements, the

monitor must be mounted to an arm, which guaranties the necessary stability under consideration of the weight of

the monitor.

Thickness of Bracket (Arm)

2.0~3.2mm

Weight of LCD assembly: 8.3kg MAX

100mm

Figure F.1

4 Screws (4M)

(Max Depth: 14mm)

12mm

4 x 12mm with lock

washer and flat washer