Operation Manual

39
Screen
8. Press the ENTER button.
4. Convenient Features
10 .Press the SELECT 왗 or 왘 button to highlight the [OK] and press the ENTER button.
This completes the keystone correction.
Selecting [Cancel] will return to the adjustment screen without saving changes (Step 3).
Selecting [Reset] will return to the factory default.
Selecting [Undo] will exit without saving changes.
NOTE: To reset the 3D Reform correction setting values, press and hold the 3D REFORM button for a minimum of 2 seconds.
NOTE: During 3D Reform adjustment, [Aspect Ratio] and [Screen] may not be available. Should this happen, first reset the 3D
Reform data and then do each setting. Second repeat the 3D Reform adjustment. Changing [Aspect Ratio] and/or [Screen] setting
can limit [3D Reform] in its adjustable range.
Screen
9. Use the SELECT 왖왔왗왘 button to select another icon which points in the direction.
On the Cornerstone adjustment screen, select [Exit] or press the EXIT button on the remote control.
The confirmation screen is displayed.