Operation Manual

6. Using On-Screen Menu

[Entry List]

Use the SELECT 왖왔 buttons on your remote control or the projector cabinet to select the signal and press the

ENTER button on the remote control or the projector cabinet to display the [Entry Edit Command] screen.

Entering the Currently Projected Signal into the Entry List

1. Display the Entry List.

2. Use the SELECT

왖

왔

button on your remote control or the projector cabinet to select any number and

press the ENTER button on the remote control or the projector cabinet to display the [Entry Edit Com-

mand] screen.

3. Use the SELECT

왗

왘

button to select [Store] and press the ENTER button.

Using the [Entry List]

Making any adjustments to the current picture will automatically register its adjustments to the [Entry List]. The regis-

tered signal can be loaded any time from the [Entry List].

NOTE: Up to 100 presets can be registered except settings on the Picture.