Operation Manual

5. Using On-Screen Menu

AdjustingtheVerticalPositionofImage[POSITION](notavailableonM403W/M363W/M323W/

M353WS/M303WS/M403H/M323H)

(onlywhen[16:9],[15:9],or[16:10]isselectedfor[ASPECTRATIO])

When[16:9],[15:9],or[16:10]isselectedin[ASPECTRATIO],theimageisdisplayedwithblackbordersonthetop

and bottom.

Youcanadjusttheverticalpositionfromthetoptothebottomoftheblackarea.

Turning on Noise Reduction [NOISE REDUCTION]

Thisfunctionallowsyoutoselectthelevelofnoisereduction.

Theprojectorissettotheoptimizedlevelforeachsignalatthefactory.

Selectyourpreferenceitemforyoursignalwhenvideonoiseisnoticeable.

Theoptionsare[OFF],[LOW],[MEDIUM],and[HIGH].

NOTE:ThisfeatureisnotavailablefortheRGBsignal.Noisereductionsettooffgivesbestimagequalitybywayofhigherbandwidth.

Noisereductionsettoonsoftenstheimage.

Setting Telecine Mode [TELECINE]

Thisfunctionallowsyoutoconvertmotionpicturelmimagesintovideo.Theprocessaddsadditionalframestothe

pictureinordertoincreasetheframerate.

NOTE:ThisfeatureisavailableonlywhenanSDTVsignalisselected.

OFF �� Turns off the TELECINE mode�

2-2/2-3 AUTO �� Detects pull-down correction method�

2-2 ON �� Uses 2-2 pull-down correction method

2-3 ON

�� Uses 2-3 pull-down correction method