Printer User Manual
Table Of Contents
- magicolor 6110 User’s Guide
- Contents
- Replacing Consumables
- Using Media
- Maintaining the Printer
- Troubleshooting
- Installing Other Accessories
- Introduction
- Antistatic Protection
- BuzzBox
- Cabinet
- Color Calibration Kit
- Dual In-Line Memory Modules (DIMMs)
- Duplex Unit
- Emulations, Fonts, and Other Software
- Lower Feeder Unit (LFU)
- Interfaces and Daughterboards
- SCSI Interface
- Internal IDE Hard Disk Drive
- SC-210 Color Convenience Copier
- Security Key
- Time-of-Day Clock
- Color Printing
- Repacking the Printer
- Technical Specifications
- Requirements
- Engine and Controller Specifications
- Print Media
- Document Option Commands
- Supported DOCs
- Header/Trailer Page Commands
- HP-GL Emulation Commands
- HP PCL 5e Emulation Commands
- Lineprinter Emulation Commands
- PostScript Emulation Command
- CCITT Groups 3 and 4 Commands
- Document Formatting
- Job and Subjob Boundary Commands
- LN03 Plus Commands (Optional Emulation Required)
- CALS Commands (Optional Emulation Required)
- TIFF Commands (Optional Emulation Required)
- Menu Chart Conventions
- Index
Lower Feeder Unit (LFU)140
23
For dual LFU installations: Adjust
both the upper and lower LFU
anchor feet to level the printer.
24
Reinstall the fuser oil bottle.
25
Plug the printer in and turn it on.
5"
In compliance with UL
guidelines, “The appliance
inlet is considered to be the
main disconnect device.”
.
Media Trays
The printer comes with a 250-sheet universal media tray (the standard upper
tray—tray 1). The lower feeder units have another 500-sheet optional media
tray (the optional trays—trays 2 and 3). Also available is an optional letter/A4
media tray. These trays provide three main benefits:
„
Expanded flexibility to switch media size, color, and type without having to
unload and load media.
„
Increased media-feed capacity.
„
Adequate printer height to accommodate the optional duplex unit.
Keep replacement trays close by, so you can easily change media by slipping
one tray out and another in.