Printer User Manual
Table Of Contents
- magicolor 6110 User’s Guide
- Contents
- Replacing Consumables
- Using Media
- Maintaining the Printer
- Troubleshooting
- Installing Other Accessories
- Introduction
- Antistatic Protection
- BuzzBox
- Cabinet
- Color Calibration Kit
- Dual In-Line Memory Modules (DIMMs)
- Duplex Unit
- Emulations, Fonts, and Other Software
- Lower Feeder Unit (LFU)
- Interfaces and Daughterboards
- SCSI Interface
- Internal IDE Hard Disk Drive
- SC-210 Color Convenience Copier
- Security Key
- Time-of-Day Clock
- Color Printing
- Repacking the Printer
- Technical Specifications
- Requirements
- Engine and Controller Specifications
- Print Media
- Document Option Commands
- Supported DOCs
- Header/Trailer Page Commands
- HP-GL Emulation Commands
- HP PCL 5e Emulation Commands
- Lineprinter Emulation Commands
- PostScript Emulation Command
- CCITT Groups 3 and 4 Commands
- Document Formatting
- Job and Subjob Boundary Commands
- LN03 Plus Commands (Optional Emulation Required)
- CALS Commands (Optional Emulation Required)
- TIFF Commands (Optional Emulation Required)
- Menu Chart Conventions
- Index
Engine and Controller Specifications188
Fonts PostScript—137 resident PostScript fonts that can be
scaled from 4 points upward and rotated to any angle in 1°
increments; all typefaces have multilingual character sets
HP PCL 5e, 5c—45 scalable and 9 bitmap fonts
PCL 6
PCL XL—45 scalable and 9 bitmap typefaces
HP-GL—40 resident HP-GL symbol sets
Type 1 / Type 3 Support—Support for Type 1 and Type 3
host-resident downloadable PostScript fonts
TrueType—Support for Type 42 (PostScript format)
host-resident downloadable TrueType fonts, support for
TrueType fonts in PCL
Kanji fonts Hard disk—MINOLTA-QMS Kanji Internal IDE Hard Disk
Drive with two Morisawa fonts
Standard
interfaces
CrownNet Ethernet—10BaseT/100BaseTX
Parallel—Centronics/IEEE 1284 bidirectional
Optional
interfaces
Network interface—Support for one optional network
interface (CrownNet for Ethernet, supporting EtherTalk,
LAN Manager/LAN Server, Netware, and TCP/IP; Crown-
Net for Token-Ring, supporting LAN Manager/LAN Server,
NetWare, and TCP/IP; or Crown for DECnet-TCP/IP)
SCSI interface—Support for up to 3 external SCSI hard
disks (up to 2 GB), Jaz drives or Zip drives
RAM Type: PC-100 Compliant SDRAM DIMMs
GN model base system RAM: 192 MB
Total RAM: Upgradable to 384 MB (through 3 DIMM
connectors)
Optional RAM 32, 64, and 128 MB DIMMs
System
software
Softloadable; stored in Flash ROM
Internal IDE
hard disk
GN model: Optional, up to 2.2 GB
5"
For information about hard disks recommended for
your printer, see the magicolor 6110 Answer Base
through the Internet at www.minolta-qms.com/
support/, or contact Support. Refer to the
Service &
Support Guide
for more information.