Printer User Manual

Introduction30
Introduction
This chapter provides information on handling, selecting, and storing media.
Media Storage and Handling
How do I store media?
When storing media, avoid
„ Direct sunlight
„ Excess heat and humidity
„ Dust
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place on a level surface.
Before purchasing a large quantity or special media, do a trial printing with
the same media and check print quality.
What should I watch out for when handling/loading media?
Attention
Do not use the media types listed below. These could cause poor print
quality, media jams, or damage to the printer.
Do not use media that is
„ Meant for ink jet printers
„ Folded, embossed, warped, or wrinkled
„ Perforated or prepunched
„ Too slick, too coarse
„ Composed of foil or gilt
„ Coated with a processed surface (such as carbon paper, heat-sensitive
paper, heat-pressure paper)
„ Irregularly shaped (not rectangular); not uniform in size
„ Bound with glue, tape, or paper clips
„ Attached to ribbons, hooks, buttons, etc.
„ Any other media that is not approved