Printer User Manual
Table Of Contents
- magicolor 6110 User’s Guide
- Contents
- Replacing Consumables
- Using Media
- Maintaining the Printer
- Troubleshooting
- Installing Other Accessories
- Introduction
- Antistatic Protection
- BuzzBox
- Cabinet
- Color Calibration Kit
- Dual In-Line Memory Modules (DIMMs)
- Duplex Unit
- Emulations, Fonts, and Other Software
- Lower Feeder Unit (LFU)
- Interfaces and Daughterboards
- SCSI Interface
- Internal IDE Hard Disk Drive
- SC-210 Color Convenience Copier
- Security Key
- Time-of-Day Clock
- Color Printing
- Repacking the Printer
- Technical Specifications
- Requirements
- Engine and Controller Specifications
- Print Media
- Document Option Commands
- Supported DOCs
- Header/Trailer Page Commands
- HP-GL Emulation Commands
- HP PCL 5e Emulation Commands
- Lineprinter Emulation Commands
- PostScript Emulation Command
- CCITT Groups 3 and 4 Commands
- Document Formatting
- Job and Subjob Boundary Commands
- LN03 Plus Commands (Optional Emulation Required)
- CALS Commands (Optional Emulation Required)
- TIFF Commands (Optional Emulation Required)
- Menu Chart Conventions
- Index

Media42
Thick Stock
Transparencies
Print Mode
to Select
Thick stock
Duplexing
Not supported
Notes
„ Printing on Japanese-sized postcards requires a postcard
feeder in the upper media tray.
„ If the postcard is warped, press on the warped area before
putting it in the postcard feeder.
Input Tray
Upper media tray only
Capacity
Up to 50 sheets, depending on the thickness of
the media
Orientation Simplex
Face up
Duplex
Face down
Type
„ Warren Spectratech Index 90 lb (163 g/m²) 3009, 3010
„ Hammermill ColorCopyCover 122254-9
„ Weyerhaeuser Cover/Card 8215
Weight Simplex
24–43 lb bond (90–105 g/m²)
Duplex
24 lb (90 g/m²) to 28 lb (163 g/m²) bond
Print Mode
to Select
Thick stock
Duplexing
Not supported
Notes
„ 43 lb (163 g/m²) bond is also referred to as 90 lb index
stock.
„ Do not mix thick stock with any other media in the media
tray, as this will cause printer jamming.
Input Tray
Upper media tray only
Capacity
Up to 50 sheets, depending on the thickness of
the transparencies
If you have problems feeding 50 sheets, try load-
ing only 5–10 sheets at a time. Loading a large
number of transparencies at a time may cause
static buildup, thus causing feeding problems
.