Manual

English-2
2. This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential instal-
lation. This equipment generates, uses, and can
radiate radio frequency energy, and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult your dealer or an experienced radio/TV
technician for help.
If necessary, the user should contact the dealer or an
experienced radio/television technician for additional
suggestions. The user may find the following booklet,
prepared by the Federal Communications Commis-
sion, helpful: “How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available from
the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.
•
•
•
•
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EX-
POSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE
THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION
CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE
HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
MAKE SURE POWER CORD IS UNPLUGGED
FROM WALL SOCKET. TO FULLY DISENGAGE
THE POWER TO THE UNIT, PLEASE DISCON-
NECT THE POWER CORD FROM THE AC
OUTLET. DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON-
NEL.
This symbol warns user that uninsulated voltage
within the unit may have sufficient magnitude to
cause electric shock. Therefore, it is dangerous to
make any kind of contact with any part inside this
unit.
This symbol alerts the user that important literature
concerning the operation and maintenance of this
unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
Important Information
Canadian Department of
Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Cana-
dian Safety Regulations according to CAN/CSA C22.2
No. 60950-1.
FCC Information
1. Use the attached specified cables with the L406T3, or L466T4
color monitor so as not to interfere with radio and television
reception.
(1)Please use the supplied power cord or equivalent to
ensure FCC compliance.
(2)Please use the supplied shielded video signal cable,
Mini D-SUB 15-pin to Mini D-SUB 15-pin.
Declaration of the Manufacturer
We hereby certify that the color monitor
L406T3 or L466T4 is in compliance with
Council Directive 2006/95/EC:
– EN 60950-1
Council Directive 2004/108/EC:
— EN 55022
— EN 61000-3-2
— EN 61000-3-3
— EN 55024
and marked with
NEC Display Solutions Ltd.
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan