Datasheet

CONFIGURATION GUIDE – NEC EXPRESS5800/R110d-1E
NEC Corporation Revision 2.2, January 2011 13
4.2 Internal Drive Configuration
4.2.1 3.5-inch Drive with On-board SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
On-board SATA Controller
4 x SATA ports, RAID 0/1 capable
(Standard)
Cable
Internal SATA Cable
1x SATA to 1x SATA, 4 sets
(Standard)
HDD Cage
3.5-inch HDD Cage
4 x 3.5-inch hot plug hard drive bays
(Standard)
HDD
4 slots available
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
N8150-285
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
N8150-279
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
N8150-280
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
N8150-282
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
N8150-283
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
N8150-336
NOTE:
 On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
 On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.
 Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.
 3 TB HDDs are not supported with the on-board SATA non-RAID controller.
 All hard drives within a RAID array should be of the same capacity.