User's Guide

The following figure illustrates a site suitable for installing the server switch unit.
* It is recommended that the server switch unit should be used in a room where temperature is in the
range between 15 to 25ºC.
IMPORTANT：If more than one devices are installed on the rack or
the ventilation within the rack is not enough, the temperature in the rack
may be raised by the heat generated from the units to be higher than the
operation temperature of the server (10 to 35°C).
It causes the server products to operate improperly. Review the air flow
within the rack or in the room and take sufficient measures so that the
temperature within the rack does not exceed the warranted temperature
range during the system operation.