User's Guide

DESKTOP INSTALLATION OF THE SERVER SWITCH UNIT
The server rack should not be installed in places such as listed below. Installing the unit in such an
area may result in the occurrence of a malfunction.
Place of uneven or slanting floor.
Place of drastic temperature change (near a heater, air conditioner, or refrigerator)
Place which much dust.
Place where intense vibration may be generated
Place where corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia, ozone, etc.) exist.
Place where the air (or dust) includes components accelerating corrosion (ex. sulfur, sodium
chloride) or conductive metals.
Place where chemicals are nearby, or chemicals may be sprayed accidentally.
Place where a carpet not subject to anti-static process is laid.
Place where some objects may be fallen on the server switch unit.
Place near a device generating intense magnetic field (such as a TV, radio,
broadcast/communication antenna, power transmission wire, and electromagnetic crane) is
placed (If unavoidable, contact your service representative to request proper shield
construction.)
Place where the power cord of the server switch unit must be connected to an AC outlet that
shares the outlet of another device with large power consumption.
Place near equipment that generates power noise (e.g., contact spark at power-on/power-off
of commercial power supply through a relay). If you must install the server switch unit close
to such equipment, request your service representative for separate power cabling or noise
filter installation.