User's Guide

DESCRIPTION OF SCREEN
1. The status of the master server switch unit appears at the left side of the screen with black
background.
2. The status of the slave server switch unit (connected with the server switch unit in cascade)
appears at the right side of the screen with blue background.
3. The purple character strings with blue background indicate port for the server you are going
to select by the cursor key. Move the cursor by <↑> or <↓> key to select a server and press
<Enter> to determine it. To move the cursor between the master and slave sides, use <←> or
<→> key.
4. The key guidance is described simply at the bottom of the screen.
5. The server marked by is now selected.
6. The server name of up to 15 characters is displayed.
(In the OSD screen example, the server name is indicated as "SVn-123456789AB". Where, n
represents port number (1 to 8).
7. The server with green numerals (1 to 8 for master unit, or F1 to F8 for slave unit) indicates
that the server is powered on. The server with white numerals indicates that the server is
off-powered or not connected.
8. The display of OSD screen will change to either of the following depending on whether the
port selected on master side is connected in cascade or not.
– When the selected port is not in cascade connection, 14 characters are displayed on master
side and nothing is displayed on slave side. (The OSD screen is the same as that of
non-cascade connection.)
– When the selected port is in cascade connection, 3 characters are displayed on master side
and 14 characters are displayed on slave side.