User's Guide

SELECTION WITH MOUSE IN OSD SELECTION MODE
You can use the scroll-mouse to select a port.
1. On the master side of OSD screen, move the mouse cursor to the desired port. The mouse
scroll <Scroll-Up> corresponds to the <↑>, and <Scroll-Down> to the <↓>.
2. When you move the mouse cursor to the port that is connected with the slave server switch
unit in cascade, the status of the server switch unit is displayed on the right side of the OSD
screen.
3. When you press the <Right> button at the port that is connected with the slave server switch
unit in cascade, the cursor moves to the slave side of the OSD screen. The server name of the
port on which the cursor is placed is displayed in purple. To move from slave side to master
side, press the <Left> button.
4. When the cursor is placed in the slave side of OSD screen while the server switch unit is in
cascade connection with slave server switch unit, use the scroll buttons to move the cursor
vertically as well as in master side.
5. Pressing the <Right> and <Left> buttons simultaneously selects the port on which the cursor
is placed. Selecting a server automatically exits from the hot-key mode, and the name of the
selected server is displayed on upper left of LCD for 3 seconds.
NOTE：To select a server using mouse in OSD selection mode when
the server switch unit is in cascade connection with slave server switch
unit, be sure to select a port on master side first, then a port on slave
side.