User's Guide

DISPLAY/HIDE THE SERVER NAME
The server name can be continuously displayed on the upper left corner of the screen, or hidden. To
display the server name, press the Scroll Lock key twice while holding down the Shift keys in normal
operation of the server (except for Hot Key mode or Auto Scan mode).
To hide the server name, press the Scroll Lock key twice while holding down the Shift keys while the
server name is continuously displayed.
NOTE：Default setting for display/hide the server name:
■ The initial state of the server switch unit is to hide the server name.
■ The server name is not displayed in hot-key mode.
■ The display/hide feature cannot be set while in hot-key mode.
■ The display/hide feature is remained valid if any other server is
selected in hot-key mode.
■ The display/hide feature is also valid when the server connected to the
slave side is selected in cascade connection with slave server switch
units.
Server name display area